What might have caused bubbles in EPIC®?

Applying EPIC® too thickly or leaving EPIC® in thick puddles (over 8 wet mils) will result in a white and foamy/bubbly film when dry. REMEDY: scrape off all foamy/bubbly film and refinish.

Bubbles occasionally come up between VCT tiles when EPIC® is applied to new VCT. It happens on new VCT tiles that have not been waxed in the past. It is likely the result of contamination (wax stripper or moisture) left between the tiles. REMEDY: pick off the bubbles (by hand or with a plastic putty knife) and refinish.